Biocide-free, high solid, fouling release coating. Based on silicone, a hydrogel micro layer provides a smooth, low friction surface making it difficult for organisms to attach to the hull and facilitates self-cleaning when the boat is in motion. For use on fiberglass, steel, and aluminum boats. Biocide-free with no run-off contamination. A two component epoxy primer that enables easy conversion from antifouling to Silic One Fouling Release System or Hempaspeed TF. Can be applied on previously painted antifouling in good condition. Light pink color contrasts with other paint layers for ease in ensuring full coverage. For use on all substrates excluding wood. Contains base (Part A) and curing agent (Part B) A two-component epoxy; high build, solvent based primer and undercoat. Helps prevent osmotic blistering in fiberglass and protects against general corrosion. For use on fiberglass, steel, aluminum, or plywood boats. Grey color contrasts with other paint layers for ease in ensuring full coverage. Contains base (Part A) and curing agent (Part B). Primarily used as a tool cleaner. Apart from a few special situations, thinning of Hempel paint is not necessary. Paints are designed to be applied out of the can, so once the paint has been thoroughly mixed (together with a curing agent if appropriate), there should not normally be a need for the addition of thinner. To learn more about the reasons why a thinner would be used please visit Technical Guideline ‘Use of Thinner’ on our web site. Transparent. This high performance epoxy primer for all propeller types, including bronze, stainless steel and aluminum, as wll as exterman running gear. High performance, biocide-free. Forms an ultra-smooth surface that minimizes growth and reduces drag. For use as an antifouling for fiberglass, steel, and aluminum boats. Ideal for both fresh and salt water use. Biocide-free with no run-off contamination. High solid, silicone based tiecoat for use with Silic One. Secures adhesion between the Light Primer or Conversion Primer and Silic One. Necessary to use as a fouling release system for fiberglass, steel, and aluminumboats. For use below the waterline. Yellow color contrasts with other paint layers for ease in ensuring full coverage. Silic One Biocide-Free, Fouling Release Paint Conversion Primer Light Primer Thinner & Tool Cleaner ProPrimer Hempaspeed TF Biocide-Free, Fouling Release Paint Silic One Tiecoat NEW Available Spring 2024 Available in shades: Available in shades: Cleaning & Maintenance Pricing subject to change without notice. Call 1-866-SEAWIDE 267 Paint Part No. Description 7745019025 Quart, Black 7745030325 Quart, Blue 7745059125 Quart, Red Part No. Description 2745341025 Quart Part No. Description 845100025 Quart Part No. Description 7721999005 Half Gallon, Black 7221999025 Quart, Black 7723039005 Half Gallon, True Blue 7723039025 Quart, True Blue 7721043005 Half Gallon, Penta Grey 7721043025 Quart, Penta Grey 7721010105 Half Gallon, Ultimate White 7722210125 Quart, Ultimate White Part No. Description 4544250705 Half Gallon 4544250725 Quart 4544550738 0.38 Gallon: Part A of Conversion Primer. Must be used with Part B (9544100412) 9544100412 0.12 Gallon: Part B of Conversion Primer. Must be used with Part A (4544550738) 4544550738 Conversion Primer Base Only 9544100412 Conversion Primer Only Part No. Description 4555217005 Half Gallon, Grey 4555217025 Quart, Grey 4555917033 Part A of Light Primer. Must be used with Part B (9536000417), 0.33 Gallon 9536000417 Part B of Conversion Primer. Must be used with Part A (4555917033), 0.17 Gallon (HEM)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==