(VIC) Electrical System Pricing subject to change without notice. Call 1-866-SEAWIDE 373 Inverter Charger Diagram ID Item and notes Positive (red) and negative (black) DC wiring. For more information on wiring see the Wiring Unlimited book. AC wiring. VE.Direct cable, available in lengths from 0.3m up to 10m. RJ45 UTP cable available in lengths from 0.3m to 30m. To prevent communication issues always use a manufactured cable. Lithium Battery Smart BMS communication cables. These are attached to the battery. Use M8 circular connector 3 pole cables if extension cables are needed. These are available in lengths from 1m up to 5m. BMS "allowed to discharge" (orange) and BMS "allowed to charge" (yellow) signal wires. DC fuse. A wide range of DC fuses and fuse holders are available from Victron Energy. For fuse ratings see the product manuals or the Wiring Unlimited book. Fuse holder with DC fuse. This fuse ships together with the product. Circuit breaker (MCB) and residual current device (RCD). Chassis or ground. Lithium Battery Smart available in 12.8V and 25.6V models from 50Ah up to 330Ah. SmartShunt battery monitor Orian-Tr Smart DC-DC Charger Non-Isolated charges the main battery from the alternator and is able to boost the voltage of a smart alternator Smart BatteryProtect disconnects the DC load as soon as the battery voltage gets too low VE.Bus BMS is a dedicated Battery Mangement System for Victron Lithium Smart Batteries. Digital Multi Control 200/200A GX to remotely view and control the inverter/ charger MultiPlus inverter/charger available for 12V, 24V, 48V systems rating from 500 until 15000VA. Solar array consisting of a single or multiple Solar Panels Solar charge controller VE.Direct non inverting remote on/off cable to enable BMS control voa the solar charger VS.Direct port Starter Battery Engine and alternator AC supply fom the grid AC system Remote on/off switch DC loads (No chargers) 7. Lithium System with VE. Bus BMS
RkJQdWJsaXNoZXIy MTAyMzU3Ng==