Part No. Description 270203 NMEA 2000 Single Device Backbone Kit Part No. Description 270300 NMEA 2000 Drop Cable, 0.5 Meter 270301 NMEA 2000 Drop Cable, 1 Meter 270302 NMEA 2000 Drop Cable, 2 Meters 270305 NMEA 2000 Drop Cable, 5 Meter Part No. Description 270201 NMEA 2000 Starter Kit 270202 NMEA 2000 Dual Device Starter Kit Part No. Description 270113 NMEA 2000 Power Isolator, Micro 270114 NMEA 2000 Inline Terminator Part No. Description 270000 NMEA 2000 Power Cable With Tee-1 Meter 270001 NMEA 2000 Backbone Cable, 0.5 Meter 270002 NMEA 2000 Backbone Cable, 2 Meter 270005 NMEA 2000 Backbone Cable, 5 Meter 270010 NMEA 2000 Backbone Cable, 10 Meter Part No. Description 270101 NMEA 2000 Single Tee Connector 270103 NMEA 2000 Two Way Tee Connector 270104 NMEA 2000 Four Way Tee Connector 270105 NMEA 2000 Female Terminator 270106 NMEA 2000 Male Terminator 270107 NMEA 2000 Through Bulkhead Adaptor (A4V) NMEA 2000 tConnectors NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers’ products. NMEA 2000 Backbone Cable Ancor’s NMEA 2000 Approved Power Cable with Tee allows for power connection to an NMEA 2000 network quickly and easily. The tee is color coded red to make identifying the power cable easy once installed as part of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation. NMEA 2000 Tee Connectors Ancor’s NMEA 2000 Approved Tee Connectors offer connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables, creating a simplified, color coded network installation. The connectors are offered in 4 configurations for maximum installation flexibility. The two way and four way tee connectors allow for multiple drop cables to be connected without additional backbone cable. NMEA Single Device Backbone Starter Kit Basic starter kit for adding a new NMEA 2000 network to your boat where your device and power source are in different locations. NMEA 2000 Drop Cable Ancor’s NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter to 5 meters to cover a wide variety of applications. NMEA 2000 Single Device Starter Kit Ancor’s NMEA 2000 Starter Kits include all components needed to create a single device NMEA 2000 network. • 1 meter power cable with tee, item# 270000 • Male and female terminators (1 each) item# 270105 and 270106 • One single tee connector, item# 270101 • One 2 meter drop cable, item# 270302 NMEA 2000 Power Isolator The NMEA 2000 Power Isolator can be used for isolating power between two independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation. Part No. Description 270108 NMEA 2000 90º Elbow Connector 270109 NMEA 2000 Field Service Connector, Female 270110 NMEA 2000 Field Service Connector, Male 270111 NMEA 2000 Blanking Cap, Female 270112 NMEA 2000 Blanking Cap, Male Networking & WiFi Pricing subject to change without notice. Call 1-866-SEAWIDE 561 NMEA Components
RkJQdWJsaXNoZXIy MTAyMzU3Ng==