Trailer & Towing Pricing subject to change without notice. Call 1-866-SEAWIDE 773 Trailer LED Guide Lights The Floating Guide Post features the ability to adjust the overall height from 48 to 60 in.The user can choose to notch the post at a specific height or set on floatable mode and allow the waterline to naturally and automatically adjust the overall height as it enters/exits the water. This allows the post to always remain above the waterline andfunction regardless of the boat ramp inclination. The metal tube is made from heavy-duty 14 gauge steel, pre-galvanized, and powder coated for a durable finish. It features a 30 degree slant through the bottom 18 in. to allow for varying hull shapes. The PVC pipe in nonmarring, black or white in color and designed to hide the floating slot and holes for a clean look. Part No. Description 86576 White Part No. 86569 PVC guide on posts feature bright orange end caps providing visual markers to help launch and load your boat safely. Posts are available in 48” and 60” lengths. The 13 degree slant guide posts give a wider target when loading your boat. The non-marking PVC pipe is braced with metal tubing 15 in. into the pipe, adding strength and impact resistance. Posts equipped with LED lights offer additional visibility. All hardware included. Bolts and nuts are zinc plated, and mounting brackets are galvanized for lasting protection against corrosion. Sold in pairs. Part No. Description 81210 24” Bunk Board Kit Guide On Kit 81215 60” Bunk Board Guide On Kit Part No. Description 86103 48” Post, Slant 13 Degree 86119 60” Post, Slant 13 Degree Bunk Carpet (T6G) Replace worn, frayed bunks with this all-weather marinegrade carpet that will resist rot or mildew. Featured in black or gray, each standard 11 in. x 12 ft. carpet roll will wrap completely around 2x4 boards and around three sides of 2x6 bunk boards. Each bulk roll measures 11 in. wide x 150 ft. long Part No. Description 86137 11 in. x 12 ft., Black Bunk Board Guide-Ons Part No. Description 86160 2 - Pack includes 1/2 in. x 1 in. boltand two nyloc nuts. The 2x4 black carpeted bunk boards are offered in 24” or 60” lengths. Posts can be mounted 5-11” on the side of the frame. If mounted above the frame, bunk placement is 19” high. U-bolts and nuts are zinc plated, and mounting hardware is galvanized for corrosion protection. Kit fits frames 2-3” wide and up to 4” high. Sold in pairs with all mounting hardware included. Swivel Brackets I-Beam Guide Post Mounting Kit The I-beam mounting kit allows you 1-1/2 in. square guide tube to securely mount onto any steel or aluminum I-beam trailer frame.The kit includes 4 brackets, 2 smaller 3/8 in. bolts and 2 3/8 in. bolts depending of frame rail width. Brackets are galvanized, hardware in zinc plated. 48 in. 60 in. Floating Guide Post, 48-60” Fixed Angle Roller Guide On Mount these 13 in. rubber rollers on top or beneath the frame for precise placement. The galvanized guide-mount adjusts for widths up to 13 in. on each side and t frames 2 - 4 in. high. Hardware included. Sold in pairs. Part No. 86102 Pontoon Guide On Bright orange end caps on these PVC guides provide a bright, visible target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2 in. square, 16 gauge steel galvanized tubing and covered with2 in. x 20 in. non-marking white PVC pipe. Guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members 2 in. wide and 2-4 in. high. All mounting hardware included. Sold in pairs. Part No. 86465 PVC Post Guide On 86124 86123
RkJQdWJsaXNoZXIy MTAyMzU3Ng==