Trailer & Towing Pricing subject to change without notice. Call 1-866-SEAWIDE 775 Brackets Bolster Brackets Made of 11 ga galvanized steel these brackets are 2-1/2” wide with 1/2” wide slots and a swivel hole 1/2” in diameter. Swivel Bracket Assembly Bolster brackets assembled with 10200G40 swivel bracket come ready to install. Swivel Brackets All swivel brackets have 3/8” diameter bunk flange holes, with bunk flanges measuring 1-3/8” x 3-1/2” and 1/2” swivel flange holes and a swivel flange measuring 2” x 3-1/2”. Double U-Bolt Bolster Brackets Using double u-bolt bolster brakes provides the most rigid bolton bracket mounting possible. Made of 7 ga galvanized steel these brackets are 4” wide with 1/2” wide slots spaced 1-3/4” apart and a top hole 1/2” in diameter. Light Duty Vertical Bunk Brackets Perfect for small craft trailers, a single bracket will allow the bunkboard to pivot with the hull as the boat is loaded. Two brackets can also be used together to hold the bunkboard in a fixed position. Made from 11 ga galvanized steel with top bolt holes measuring 7/16”. Pontoon Bolster Brackets 26244GA 10601G40 10600G40 10604G40 10603G40 Adjustable Front Y Bar Bracket Use to mount a 2” square tube vertically onto frame cross members. Commonly used to mount Y shaped bow guide . • 9/16” Diameter holes Bolt-On Tail Light Brackets Mounting holes fit standard DOT stop/tail lights on the side of the trailer frame. 3/8” Carriage bolt holes for mounting. Hardware not included Tail Light Protectors Added protection for fragile trailer lights. These mount between existing tail light brackets and the lamp. Fit standard DOT tail lamps. License Plate Bracket Use this bracket to upgrade the appearance of your trailer. This aluminum tread plate bracket fits standard left side DOT tail lamps, and mounts using the existing hardware on your trailer. Part No. Description 10600G40 Lanced, Length 9-1/2”, Slot 7/16” x 6” 10601G40 Smooth, Length 12-5/8”, Slot 1/2” x 9-1/8” 10603G40 Dimpled, Length 7-1/2”, Slot 7/16” x 4-3/8” 10604G40 Lanced, Length 8-1/2”, Slot 7/16” x 2-1/2” Part No. Description 26244GA 11 ga. Galvanized Steel (C9E) Part No. Description 10100G40 8” Tall 2-3/4” Slot Length 10101G40 10” Tall 3-3/4” Slot Length 10102G40 12” Tall 4-3/4” Slot Length Part No. Description 10000G Uses 10100G40, 9” Tall 10001G Uses 10101G40, 11” Tall 10002G Uses 10102G40, 13” Tall Part No. Description 10205GA Galv, 11 ga, PR, 2-1/2” + One Hole Centered 10206GA Galv, 7 ga, EA, 2-1/2” + One Hole Centered 10200G40 Galv, 10 ga, EA, 2-1/2” + One Hole Centered 10201G40 Galv, 11 ga, EA, 2” 10201PG Pre-Galv, 11 ga, EA, 2” Part No. Description 10190G40 8-3/4” Overall Height 10191G40 9-3/4” Overall Height 10192G40 11-3/4” Overall Height 10196GA 15” Part No. 10170A40 Part No. 26051A Part No. 26053A Part No. Description 26057AA Aluminum 26057G40 Galv. Steel Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunkboards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.
RkJQdWJsaXNoZXIy MTAyMzU3Ng==