Anchors & Docking Pricing subject to change without notice. Shop 24/7 at www.seawideb2b.com 127 AB3 AB1 Anchors Catch the big fish while anchored. The galvanized steel anchor features four tines that fold out of the way while stored for space maximization and release when ready for use. The 1-1/2 Pound anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower moving water. The 3.3 Lb. anchor has a heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface on deeper and faster moving water. Both feature 30’ of 3/16” Inch black nylon diamond braid anchor rope and a storage bag. Perfect for anchoring kayaks, canoes, stand-up paddleboards, and even john boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide area mushroom cap with drains in the base. Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink into the point where it has displaced its own weight in seabed material. Helps end being a victim of changing winds and currents while fishing in the anchored position. The kit allows deployment of any anchor, drift chute, or stake out pole before judging the current and wind while still remaining in a favorable fishing position. Mounted just off of one gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16” mini zig zag cleat. The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern, without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat. Kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchor recommended, but not provided. Anchor rope features 75’ of diamond braid 3/16” nylon rope for anchoring. Comes with a winder to easily allow you to lock your desired length and to wind and unwind your rope as needed while on the water. The original, floating YakStick Mud Anchor provides effortless and silent anchoring in shallow waters. A preferred anchoring method in shallow coastal waters or in shallow lakes and streams. The multi-purpose handle design allows for a firm grip when pushing through a variety of hard bottoms and can be flipped around to be used as a push pole mud foot or push off. The shaft is made of 7/8” vertical and horizontal pultrusion-formed fiberglass, for unsurpassed strength. Its handle and point are made of rigid nylon. Part No. Description AB1 1.5 Lb., 3-1/2” Tines with Bag AB3 3.3 Lb., 6” Tines with Bag Part No. Description 01001001B 5 Lbs., Black with Vinyl Coating Part No. Description AK1 Deluxe Trolley with Pulleys Part No. Description 010054 75’ Black Polyproplyene Rope Part No. Description 010079 6.5’ Black Floating Grapnel Anchor Kit Mushroom Anchor Deluxe Anchor Trolley Anchor Rope YakStick (YAK)
RkJQdWJsaXNoZXIy MjcwNjQzNw==