Electrical System Pricing subject to change without notice. Shop 24/7 at www.seawideb2b.com 412 Wire Accessories This battery cable stripper punctures the cable’s insulation, breaks the insulation free and pulls the cut insulation from the wire in one efficient motion. Battery Cable Stripper Part No. 703075 Part No. 700115 Dielectric Silicone Compound • Fights oxidation to improve conductivity • Penetrates aluminum oxide to maintain current paths • Temperature rated at 40° to 500°F / 4°C to 260°C • 1/3 oz tube (A4V) Part No. 702030 Automatic Wire Stripper • Automatically adjusts to different wire sizes • Strips without damage or marking of conductors, slim jaw for easy access, steel side cutter • Strips and cuts wire from 24 AWG to 12 AWG / 0.02-5.0mm2 • Wire stop adjusts length of strip from 3/8" to 1/2" (9.5 to 12.7 mm) • Length: 6.7" (17.0 cm) (A4V) (A4V) Electrical Tape Black, vinyl tape used for electrical cable insulation. Roll is 3/4”W x 60’L. (H6F) Part No. 152341 Part No. 703024 Mini Pocket Butane Torch • Piezo electronic ignition system • Flame temperature up to 2500°F / 1300°C • Windproof and waterproof flame • Pocket size allows the unit to fit easily into any tool kit • Powered by disposable cigarette lighter or refillable butane fuel cell (included) Manufactured with Ancor’s premium UL1426 tinned copper. The battery cable is fine stranded to produce maximum conductivity and flexibility. In addition, all Ancor battery cable is flame retarded, UV inhibited, rated to 600V and 105°C. The lugs are tinned copper to avoid corrosion and last longer. Each end has adhesive lined 3:1 heatshrink tubing placed over the electrical connection to seal out moisture and other corrosive elements found in the marine environment and to provide strain relief ensuring a longer lasting battery connection. Battery Cable Assemblies Part No. Description 189130 4AWG 18" Black 189131 4AWG 18" Red 189134 4AWG 32" Black 189135 4AWG 32" Red 189140 2AWG 18" Black 189141 2AWG 18" Red Part No. Description 703023 Heat Gun, 120V 703060 Pro Torch 120V Heat Gun Use with Ancor heat shrink connectors to offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief. Two settings: Low 572ºF 10 CFM and High 1,000º 17 CFM. 6.5’ cord and 120V AC. (A4V) (A4V) (A4V) (SHR) Electrical Tape 7.0 Millimeter, all-weather vinyl insulating tape used for electrical and mechanical protection in temperatures ranging from 0° to 220° F. UL Listed and CSA Approved, EV 77B black electrical tape is lead free, flame retardant, and is engineered with a polymeric backing construction, as well as a specialized method of bonding the adhesive to the vinyl backing, which allows the tape to be highly conformable and deliver a moisture-tight seal, even in extreme temperatures. Part No. Description 104706 EV 077 BLK-3/4IN X 66FT-100 RLS
RkJQdWJsaXNoZXIy MjcwNjQzNw==